1531 W. Mohawk Dr.
Tomahawk, WI 54487

4/01/02
Professional Hydraulic Jacks announces their new line of Bottle Jacks. They stand up to the roughest conditions. Our toughest customers have been demanding these bottle jacks. We have provided the Bottle Jacks to our customers, and they are completely satisfied!
The jacks are seam welded robotically and all check valve ports are machined right in the 1" base of flat stock, thus allowing the jack to be used in vertical or horizontal positions. The jacks are equipped with (3) load bearings. Any loads produced by the vehicle axle tilting are absorbed as the piston comes in contact with the cylinder. If you distribute to the heavy duty market or the tire industry nothing compares. "Nothing". After 3 years of testing the results are excellent.

We carry 2 to100 tons. Our most popular models are the 61115 (15-ton low height bottle jack) and the 61215 (15-ton standard height bottle jack). Price comparisons to our competitor's 12-ton bottle jacks are the same but you get an extra 3 tons of lifting capacity.

Also a participant in our bottle jack program would qualify for our point of sale display, which is free of charge a $250.00 Value!

 

4/23/02
Professional Hydraulic Jack announces their new-patented lowering control system or LCS. It is equipped on all of our folding engine cranes air hydraulic telescoping floor jacks, 2 ¼ ton very low-profile floor jack and our 20-ton floor jack
.
The technology is excellent, evident in the engine cranes. When pulling a motor or engine out of a vehicle, the lower control system only allows the motor to be lowered or released at a certain speed thus protecting the user of the equipment from harmful and hurtful damage. After the weight is off the piece of equipment the lowering of the equipment resumes to normal speed. I'm sure you have had experience with engine cranes that if you turn the release to far and then boom the engine comes flying down and the back-end of the crane comes up. This will never happen with LCS!

Contact a sales representative for more details.

5/28/02
Professional Hydraulic Jacks announces its new Model 67000 (24" Mid-Rise lift). Designed for the home do-it your self and professionals. The lift can be used for changing tires, break jobs, bodywork and other various automotive repairs. The lift is operated by air/over hydraulic, and completely mobile, which can be wheeled around your shop or garage. The design was built for quality at an affordable price. Contact us for your nearest dealer for more information.

7/11/02
Professional Hydraulic Jacks announces its new development of air jack's. Now available 51605 (5-ton Air Bumper Jack), 51610 (10-ton Air Bumper Jack) and the 51612 (10-ton Air Barrel Jack), designed with the best quality of steel, all backed with our platinum lifetime warrantee. All of our products are completely serviceable by more that 300 service centers. Our 51610 (10-ton Air Bumper Jack) is our most popular model, for the fact that it is 10-tons of power and it is sold cheaper than our competitors 7-ton jack.

8/10/02
Coming soon Wheel Skate ™. Please ask for details to be on the forefront of this product.

8/16/02
Coming soon 2 ¼ ton Air Hydraulic Floor Jack, faster and smoother than the competition!

8/21/02
Professional Hydraulic Jacks releases their new 28 pages, 4-color catalog for the dealers as a valuable sales tool. We hope everyone enjoys our new catalog and we hope it aids in your bottom line.